Boiler Installation & Service in Canmore & Banff

No heat Could be a failed circulation pump, seized zone valve, thermostat fault or ignition issue on the boiler itself. The cause needs to be properly diagnosed before parts are replaced, and Cleon works through this systematically.

Inconsistent or uneven heating Often caused by air trapped in the system or a failing circulation pump. Some zones may heat well while others stay cold, which usually points to a zone valve or balancing issue.

Low or high system pressure Hydronic systems operate within a specific pressure range. Pressure that is too low can cause the boiler to shut off; too high puts stress on components. Both can usually be corrected during a service call.

Leaking components Moisture around valves, fittings, the expansion tank or the boiler itself indicates a leak. Even small leaks should be addressed promptly to prevent water damage and system air ingestion.

Unusual sounds Kettling, banging or gurgling from the boiler or pipes typically indicates sediment buildup, air in the system or inadequate water flow through the heat exchanger.

High fuel bills A boiler that is working harder than it should often has a correctable cause, such as a dirty heat exchanger, incorrect temperature setpoints or a pump running at the wrong speed.